Ubiquiti UniFi In-Wall HD Access Point [UAP-IW-HD-US]

This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 2.4GHz & 5GHz.

Ubiquiti UniFi In-Wall HD 802.11ac Wave2 MIMO 5GHz enterprise access point transforms an ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi- access point with 4x4MIMO technology.

• 4x4 MU-MIMO on 5GHz (1733Mbps max PHY rate), 2x2MIMO on 2.4GHz (300Mbps max PHY rate).
• 802.3af for base functionality. 802.3at required if using PoE passthrough.
• 1x4 (1 in, 4 out) switched Gigabit Ethernet ports with configurable PoE passthrough (port 1 only)

• Dimensions: 5.5"x 3.41"x1.01" 139.7mmx 86.7mmx 25.75mm ()
• Weight: 210 g (7.41 oz)
• Networking Interface: (5) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: 802.3af PoE or 802.3at PoE+
Supported Voltage Range: 44 to 57VDC
• Power Supply: UniFi Switch (PoE)
• PoE Out: 48V Pass-through (Pins +1, 2; -3, 6)
• Power Save: Supported
• Beam-forming: Supported
• Maximum Power Consumption with PoE passthrough: 11W, 23W
• TX Power: 2.4GHz: 23dBm, 5GHz: 26dBm

• Dual Band: (2) Single-Port, Single-Polarity Dual-Band Antennas, 2.4GHz: 1.8dBi Each, 5GHz: 3.4dBi Each
• Single Band: (2) Single-Port, Dual-Polarity, Single-Band Antennas, 5GHz: 6dBi Each
• Wi-Fi Standards: 802.11 a/b/g/n/r/k/v/ac/ac-wave2
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.11w/PMF
• BSSID: Up to 8 per Radio
• Mounting: 1-Gang Electrical Wall Box (Not Included)
• Operating Humidity: 5 to 95% Noncondensing
• Operating Temperature: -10 to 60° C (14 to 140° F)
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guess Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 200+