Positron G.hn COAX Wave-2 to Ethernet Bridge over Coax [G1001-C]

The Positron Access Solutions G.hn to Ethernet Bridge over coax is a Managed Demarcation Point acting as a Virtual CPE (vCPE) that can be used to connect to a Residential Gateway (RG) that does not have native support for G.hn on its WAN port. Positron is ideal for residential and office Multiple Dwelling Units (MDU) applications.

The G1001-C device is used to control how a Residential Gateway (or User CPE) connects to the G.hn Access Network under the control of the Positron GAM. In this role, it makes sure the information transmitted over the G.hn links is protected with strong AES-128 encryption.

• G.hn Wave-2 to Ethernet Bridge over Coax
• G.hn port (F-type male connector)
• CATV port (F-type male connector)
• Two 10/100/1000BaseT RJ45 ports

• LED: Power, RJ45 ports link/active, G.hn link
• Power Source: 12 Vdc / 1A power adapter
• Power Consumption: Less than 3W
• Certification: CE Mark, FCC Part 15 Class A
• Operating Temperature: 0°:C to 40°:C
• Storage Temperature: -25°:C to 80°:C
• Operating Humidity: 5% to 95% relative, non-condensing
• G.hn Standards: G.hn Wave-2 Client based on GigaWire Alliance specification and fully compliant with the following ITU-T standards
• G.9960 Amendment 2 - System Architecture and PHY Layer
• G.9961 Data Link Layer
• G.9962 Management
• G.9964 PSD
• Ease of Deployment: Support G.hn operation over coax cabling
• Point-to-point and Point-to-multipoint support: Supports Point-to-point (twisted pair and coax) with G1000-C
• Ease of Operation: Automatic firmware and configuration management via the Positron GAM
• Encryption: AES-128 encryption with individual keys for each end-node under the control of the Positron GAM acting as the Master Node
• Modulation and Frequency Band: Supports OFDM 200 MHz (Singe Input Single Output - SISO) with support for Neighbor Domain Interface Mitigation (NDIM), Radio Band Notching function allows cohabitation with legacy analog cable TV channels over coax
• Bandwidth Management: Up to 1.7 Gbps with Dynamic Bandwidth Allocation to optimize throughput based on nature of traffic flows with TDD Multiplexing for programmable upstream / downstream ratio
• Vectoring (Telephone Wiring): Support for VectorBoost cloud-based vectoring for Far-End Crosstalk (FEXT) mitigation and improved performance over telephone wiring
• Mitigation of Near-end Crosstalk: Near End Crosstalk (NEXT) mitigation and support for Neighbor Domain Interface Mitigation (NDIM)
• PSD: Programmable PSD mask for coexistence with xDSL / radio and Far End Crosstalk (FEXT) mitigation via Cloud-based VectorBoost vectoring
• Reliability and Resiliency: State of the art LDPC Forward Error Correction (FEC)

• G1001-C Gigabit Ethernet Bridge
• AC Wall Adapter