Cambium PTP 670 4.9 - 6.05GHz Connectorized Radio w/ AC Power Injector + 2 N-Female Connectors

Out of stock
Regular price $3,044.37 USD

Product details

  • Type Outdoor Wireless
  • Vendor Cambium Networks
  • SKU C050067H001B

Cambium Networks C050067H001A is a connectorized PTP 670 network device, designed to be used inn high capacity multi-point (HCMP) applications. Operators now have the flexibility to deploy not only in Point-to-Point topologies, as HCMP allows up to eight remote nodes to connect to a single master radio. An ideal solution for fiber replacements or extensions, video surveillance backhaul, LTE, macro-cell and small-cell backhaul, last-mile access, disaster recovery, network redundancy, and building-to-building campus connectivity.


Product Features:

  • Frequency band: 4.9 to 6.05GHz
  • Maximum of 450MB/s and maximum range of 155 miles in a PTP topology
  • Up to 8 remote notes and maximum of 25 mile range in a HCMP topology
  • FIPS-197 128/256-bit AES encryption
  • IEEE 1588v2 and Synchronous Ethernet (SyncE)
Product Specifications:
  • RF Bands: Wide-band operation 4.9 to 6.05GHz (allowable frequencies and bands are dictated by individual country regulations)
  • Channel Sizes: 5/10/15/20/30/40/45MHz channels, depends on individual country regulations
  • Spectral Efficiency: 10bps/Hz maximum
  • Channel Selection: By Dynamic Spectrum Optimization or manual intervention. Automatic selection on start-up and continual self-optimization to avoid interference
  • Maximum Transit Power: Up to 27dBm
  • Modulation / Error Correction: Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual-payload MIMO
  • Duplex Scheme: Time Division Duplex (TDD), Adaptive or fixed transmit/receive duty cycles, Split frequency operation allows separate transmit and receive frequencies where allowed by regulation, Optional TDD synchronization using PTP-SYNCH Module
  • Antenna: Operates with a selection of separately-purchased single and dual polarity antennas through (2) N-Type female connectors
  • Range: Up to 155 miles (250km)
  • Security: FIPS-197 compliant 128/256-bit AES Encryption (optional) HTTPS and SNMPv3, Identity-based user accounts Configurable password rules, User authentication and RADIUS support, Event logging and management; optional logging via syslog, Disaster recovery and vulnerability management
  • Ethernet Protocol: IEEE 802.3
  • Latency: 1-3 milliseconds one direction
  • QoS: Extensive QoS supporting up to 8 Queues
  • Packet Classification: Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
  • Packet Performance: Line rate (>850k packets per second)
  • Timing Transport: Synchronous Ethernet; IEEE 1588v2
  • Frame Support: PTP Mode: Jumbo frame up to 9600 bytes, HCMP Mode: 2000 bytes per frame
  • Flexible I/O: (2) Gigabit Ethernet copper ports: Gigabit Port 1: Data + PoE power input, Gigabit Port 2: 802.3at PoE output port, (1) SFP port: Single-mode fiber, multi-mode fiber, or copper Gigabit Ethernet options available
  • T1/E1 TDM Support: (8) T1/E1 TDM (Network Indoor Unit (NIDU)), G.823-compliant timing, DC power input (compatible with AC+DC Power Injector output)
  • Network Management: In-band and out-of-band management (OOBM)
  • System Management: IPv6/IPv4 dual-stack management support, Web access via browser using HTTP or HTTPs/TLS3 SNMP v1, v2c and v3, MIB-II & proprietary PTP MIB, Online spectrum analyzer (no impact on payload traffic or network operation)
  • Installation: Built-in audio and graphical assistance for link optimization
  • Remote Modules Master: Up to 8 Nodes
  • Channel Bandwidth: 20 and 40MHz
  • Spectral Efficiency: 8bps/Hz Max
  • Line Rate Packet per Second: 850K pps
  • Latency in HCMP Mode: 2 to 4ms one way (typically)
  • Dimensions: 294 x 318 x 90mm (8.0 x 12.5 x 3.5")
  • Weight: 3.1kg (6.8lbs), including bracket
  • Operating Temperature: -40 to 140°F (-40 to 60°C), including solar radiation
  • Dust-Water Intrusion Protection: IP66 and IP67
  • Wind Speed Survival: 200mph (322kph)
  • Power Supply: 32 to 104°F (0 to 40°C) 35W, 90-240VAC, 50/60Hz
  • Power Consumption: 30W maximum (up to 70W with 802.3at device on auxiliary products)
  • Protection and Safety: UL60950-1, IEC60950-1, EN60950-1, CSA-C22.2 No. 60950-1, CB approval for Global
  • Radio: 4.9GHz: FCC Part 90Y, RSS-111, 5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8;, EN 302 502; EN 301 893 Eire ComReg 02/71R1, UK Approval to IR2007, EMC: Europe - EN301 489-1 and -4