Cambium PMP 450 5GHz 60deg Dual-Pol Sector Antenna (+FSK)

The PMP 450 5GHz 60deg Dual-Pol Sector Antenna was designed specifically for use with the PMP 450 platform of products, and delivers optimized performance, including maximized spectral efficiency, triple null fil, and easy installation. Each AP can provide a specific sector size or area of coverage. PMP 450 APs are connectorized radios and can support any coverage you need. However, we recommend using the AP with the high-performance antennas that have been developed specifically for the PMP 450 product – either a 6-sector dual mode (both FSK and OFDM) or a 4-sector OFDM antenna. Your individual network and configuration may require a different sector width. If alternative configurations are needed, be sure that local regulations are followed prior to purchase.

Note that the N-type to N-type cable required to connect the AP to the antenna is not included and must be purchased separately (SKU# 30009406002). For an OFDM-only deployment, you will need two cables, one for the horizontal and one for the vertical OFDM polarities. If you are deploying in the Combo mode (i.e., serving both FSK and OFDM subscribers), you will need three of these cables. Each antenna is supplied with a bracket for mounting to a pole that is 2 inches (50 mm) to 3 inches (75 mm) in diameter.

• Frequency Range: 5.4 - 6.0 GHz
• Antenna Type: Access Point Sector
• Gain: 17dBi (+/-1dBi) OFDM | 10dBi (+/-1dBi) FSK
• Port to Port Isolation: >30dB to all ports
• OFDM Polarization: Dual Linear, Horizontal / Vertical
• FSK Polarization: Linear, Vertical
• Max. Input Power: 30W OFDM | 10W FSK
• Cross Polarization: >25dB OFDM | >20dB FSK
• Dimensions: 22.4" x 5.7" x 2.5" (570 x 146 x 64 mm)
• Antenna Weight: 6.4lbs (2.9kg) without mounting bracket
• Antenna Connector: 3 x N-Type Female, Straight (not included)
• Mechanical Downtilt: 0° to 11°

(1) PMP 450 5GHz 60deg Dual-Pol Sector Antenna

(1) Pole Mounting Bracket