BLiNQ Networks

BLiNQ Networks FW CAT 12/13 CPE LTE B42/43/48

Out of stock
$200.00 USD

Product details

  • Type LTE
  • Vendor BLiNQ Networks
  • SKU FWC-145IN-35

Share on Social Media:

Description

Product Features:

  • Supports TDD-LTE Mode Band 42/43 & 48* Supports 3GPP Release 12 Compliant
  • Supports up to UE LTE Downlink Category 12/ Uplink Category 13 PHY Rate **
  • Supports 4×4 MIMO with 40 MHz CA Maximum
  • Supports DL 256QAM with DL 2×2 MIMO only up to 4 Carrier Aggregation
  • Supports UL 2Tx (CDD / UL_CA/ UL_MIMO) Physical 2Tx & 8Rx in RF Front End
  • Supports 1.8V and 3V SIM and USIM Card for LTE Mode
  • Supports Dynamic Host Configuration Protocol
  • Built-in Web Server for Web-Based Configuration
  • Password Protected Access and Configuration
  • Supports IEEE 802.3, IEEE 802.3u, 802.3ab (10/100/1000 Mbps )
  • Supports up to 2 RJ-45 Giga Ethernet Port
  • Supports NAT/Tunnel/Bridge/Router Mode
  • Supports VPN Pass-Through and End Point
  • Supports 802.11 b/g/n (2 x 2)
  • Wi-Fi Technology
  • Supports 802.11 ac Wave 2 (2 x 2) Wi-Fi Technology


Mechanical, Environmental, and Regulatory:
  • Dimension (H x D): 7.9” x 5.3” (200 mm x 134 mm)
  • Weight: 1.1lbs (0.5 kg)
  • PoE: 802.3at
  • Power:
    Input: Universal range 100~240V AC
    Output: 12V/1.5A DC
  • Reset/Reboot Button: Tactile Switch (inside box)
  • Operating Humidity: 0% to 95%
  • Storage Humidity: 0% to 95%
  • Operational Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)
  • RF: EN 301 908-1 V11.1.1; EN 301 908-13 V11.1.1 (Part 96)
  • Wi-Fi 2.4 GHz: EN 300 325 V2.1.1 (Part 15C)
  • Wi-Fi 5 GHz: EN 301 893 V2.1.1
  • Safety: IEC 60950-1/EN 60950-1
  • EMC: Draft EN 301489-1 V2.2.0 ; Draft EN 301489-17 V3.2.0
  • RF Exposure: EN 50385:2002 ; EN 62311:2008
  • CBSD Category: CBSD Cat A


Networking and OAM:
  • LTE BB ASIC: GDM7243A (GCT Semiconductor)
  • LTE RF ASIC: GRF7243A (GCT Semiconductor)
  • Ethernet LAN Ports: 2 x RJ-45 Port ; 10/100/1000 Auto-Sensing, Auto-MDX
  • 11b/g/n Wi-Fi SoC: RTL8192ES (Realtek)
  • 11ac Wi-Fi SoC: RTL8812BEH (Realtek)
  • LED Indicators: Signal Strength / LAN / Wi-Fi / SIM / Power
  • SIM Function: 1.8V, 3V SIM and USIM card
  • PIN/PUK Code: Yes (Ready with chipset)
  • Stack: IPv4, IPv6, Dual
  • NAT/Dynamic NAT: Yes
  • Router Mode: Yes
  • Bridge Mode: Yes
  • Tunnel Mode: GRE, L2TP, IPsec, PPTP (Available per request)
  • DCHP Server in LAN: Yes (253 Clients)
  • DNS Relay: Yes
  • DDNS Client: Yes
  • VPN Pass-Through – IPSec/PPTP/L2TP: Yes
  • UPNP: Yes
  • HTTP(s) Server: Yes
  • ALG Support (FTP/SIP/...): Yes
  • Networking Debug/Testing: IPerf, Ping, Traceroute


Radio Specification:
  • Peak Throughput: DL 440 Mbps (Config 2-7); UL 30Mbps (Config 2-7)
  • Carrier Aggregation: DL 4CC up to 20 MHz each (w. DL 2x2), DL 2CC up to 20MHz each (w. DL 4x4), DL 1CC up to 20MHz each (w. DL 4x8), UL Maximum 40MHz with 2CC
  • Frequency Band: TDD LTE Bands 42, 43, 48
  • DL Carrier Aggregation Bandwidth: 80 MHz max.
  • UL Carrier Aggregation Bandwidth: 40 MHz max. with 2CC
  • UL 2Tx Diversity: 23 dBm
  • UL 2Tx CA: 23 dBm
  • UL 2Tx MIMO: 23 dBm
  • Tx Power Dynamic Range: 63 dB
  • Receiver Sensitivity (@ 20 MHz): -96 dBm
  • Channel Bandwidth:10, 20 MHz
  • DL Carrier Aggregation Matrix: DL MIMO 2x2 / 4x4 / 8x4, UL 1x2 (with diversity); UL 1x2 CA; UL 2x2
  • MIMO: DL MIMO 2x2 / 4x4 / 8x4, UL 1x2 (with diversity); UL 1x2 CA; UL 2x2
  • LTE Compliance: 3GPP Release 12


User Interface & Security
  • WEB: Yes
  • SNMP: Yes
  • TR-069: Ready for IoT
  • TR-0143: Ready for IoT
  • FOTA Upgrade: Yes
  • System Log/Diagnostic: Yes (Chipset embedded tool)
  • Username/Password Configuration: Yes
  • L2/L3 Firewall: Basic Firewall/Port Forwarding/Port Trigger/DMZ/Remote WAN Ping/ Remote Web Access Control
  • Time Zone Configuration: Yes
  • Firmware: Dual Image (Switchable)