BLiNQ Networks FW-25 Band 41 CAT12 2.5GHz Outdoor Standard Gain CPE

Supporting up to 80 MHz bandwidth with carrier aggregation and 256 QAM modulation in downlink, the BLiNQ Networks FWC-122-25 CPE provides a high capacity solution to meet the connectivity needs of a wide variety of users. Its rugged housing, installation bracket and high IP67 rating also provides peace of mind for deployments in all kinds of tough outdoor environments.

• Supports TDD-LTE Band 41
• 3GPP Release 12 Compliant
• Supports up to UE LTE Downlink Category 12/ Uplink Category 13 PHY Rate
• Supports 4x4 MIMO with 40 MHz CA Maximum and DL 2x2 MIMO up to 80 MHz CA
• Supports DL 256QAM with DL 2x2 MIMO only (Contiguous and Non-Contiguous Bandwidth)
• Supports UL 2Tx (CDD / UL_CA/ UL_MIMO)
• Physical 2Tx & 4Rx in RF Front End
• Supports 1.8V and 3V SIM and USIM Card for LTE Mode
• Supports Dynamic Host Configuration Protocol
• Built-in Web Server for Web-Based Configuration
• Password Protected Access and Configuration
• Supports IEEE 802.3, IEEE 802.3u, 802.3ab (10/100/1000 Mbps )
• Supports 802.3at POE standard - Available on outdoor rated WAN port
• Supports NAT/Tunnel/Bridge/Router Mode
• Supports VPN Pass-Through
• IP67 Environmental Rating

• PoE: 802.3at
• Power Input: Universal range 100~240V AC ; Output: 56 VDC
• Reset/Reboot Button: Tactile Switch (inside box)
• Operating Humidity: 5% to 95%
• Storage Humidity 5% to 95%
• Operational Temperature: -40°F to 131°F (-40°C to 55°C)
• Storage Temperature: -40°F to 158°F (-40°C to 70°C)
• FCC: FCC Certified
• Safety: IEC 60950-22:2016, IEC 62368-1:2014 compliant
• RF Exposure: Meets 47 CFR FCC Part 2.1091

(1) BLiNQ Networks FW-122HG-25 CPE

(1) CAT 5 Cable

(1) PoE Adapter

(1) Power Cord

(1) Mounting Bracket